Template document library

Piman uses this Excel template library to generate specifications on request.
It is for free use.

GRS library

Each data sheet is automatically matched to appropriate General Requirements Specification (GRS) for each RFQ. GRS list is given below. A copy of any document for non-commercial use may be obtained by personal request.

1. Medium voltage adjustable speed drives of 200 – 4000 kw
2. Pitot tube flow element
3. Bladder surge control system
4. Cathodic protection
5. Composite elevated water storage tank
6. Conductivity measurement systems
7. Control and isolation valves
8. Fiberglass reinforced plastic (FRP) piping and fittings
9. Fibreglass reinforced plastic storage tanks
10. Free chlorine measurement instruments
11. High voltage heavy duty motors
12. Horizontal axially split high pressure pumps
13. Instrumentation and control of packaged equipment
14. Instrumentation tubing
15. Instruments
16. Low voltage heavy duty induction iec motors
17. Magnetic flow meters
18. Magnetic level indicators
19. Metal tank weldment
20. Metering pumps
21. Multi-channel water quality analyzer
22. pH and ORP measurement instruments
23. Plug valves class 300 and above
24. Pressure and back pressure regulators
25. Pressure and differential pressure switches
26. Pressure gages
27. Rubber arch expansion joint with tie rods
28. Rubber lining inspection and spark testing
29. Rubber seated butterfly valves 3 inches through 72 inches ANSI/AWWA C504 class 150
30. Temperature transmitters
31. Thermoelements and thermowells
32. Thermometers and thermowells
33. Turbidity measurement instruments
34. Ultrasonic level transmitters
35. Valve electric actuators
36. Valve pneumatic actuators
37. Vertical turbine pumps
38. Vessel rubber lining

P&ID library

At present only Adobe Illustrator meets high graphics standards suggested by Piman for P&ID development. The basic set of drawings in AI format to start any project is given below for free use.

1. P&ID symbols (311KB) and description,
2. Intake and pretreatment (254KB),
3. SWRO unit (282KB),
4. SWRO membrane arrays (254KB),
5. Chemical dosing system (237KB),
6. Air-driven batch chemical dosing system (239KB),
7. CIP system (287KB),
8. Motor cooling system (236KB),
9. Intake traveling band filter (250KB),
10. High capacity pump instrumentation (269KB),

White papers

• Hydraulic design of side-ported RO vessel arrangements - (.doc format, 113KB) engineering recommendations on how to optimally perform hydraulic design of the reverse osmosis vessel arrangements in the desalination plants.(joint research with BEL, 2003)
   
• Cavitation-free non-overload start/stop procedures - (.doc format, 832KB) paper showing the elegant solution of the second-in-importance problem of any reverse osmosis desalination plant - start/stop sequences for high pressure pump coupled to the Pelton turbine. This procedure is implemented in the Palmahim SWRO plant (Israel). At present 5 out of 6 SWRO trains are stopped daily for 4 hours(!) to maximize revenues from low night tariffs.(Internal report, 2004)
   
• Sea water multi-effect distillation energized by combustion turbine - (.doc format, 233KB) feasibility study results of the Combined Power and Desalination Plant incorporating the Low-temperature multi-effect distiller. (Desalination, Volume 127, Issue 3, 20 February 2000, Pages 261-269)
   
• Regarding CO2 recuperation system conceptual design - (.doc format, 116KB) some thoughts aloud about the CO2 recuperation options in the product posttreatment stage. (White paper, 8 October 2008)